Aruba 2530 8 Switch (J9783A)

Overview:

The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprises, branch offices, and SMBs. This series of fully managed switches delivers full Layer 2 capabilities with enhanced access security, ACLs, traffic prioritization, sFlow, and IPv6 host support. Right size deployment is simple with choice of 8-, 24-, and 48-port models available with Gigabit or Fast Ethernet ports, optional PoE+, and optional 10GbE uplinks. The 2530 delivers power savings with fanless models, Energy Efficient Ethernet, ability to disable LEDs and enable port low power mode. These switches provide consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management.

The Aruba 2530 Switch Series offers uplink flexibility with either four Gigabit or two 10 Gigabit Ethernet uplinks on some 24- and 48-port models. The Gigabit 24- and 48-port models have either two small form-factor pluggable plus (SFP+) or four small form-factor pluggable (SFP) slots for fiber connectivity. The Fast Ethernet 24- and 48-port models have two SFPs and two RJ-45 Gigabit uplinks. The compact and fan-less 8-port switches offer additional flexibility with two dual-personality ports that can be used as either RJ-45 Gigabit Ethernet or SFP ports. The PoE+ switch models are IEEE 802.3af- and IEEE 802.3at-compliant with up to 30 W per port, making them suitable for voice, video, or wireless deployments with PoE+

Key Features

Cost-effective, reliable and secure Aruba Layer 2 switch series.
ACLs, EEE, traffic prioritization and models with 10 Gigabit uplinks.
8-, 24-, and 48-port Gigabit or Fast Ethernet models.
PoE+ models for voice, video and wireless.
Supports ClearPass Policy Manager and Airwave Network Managemen

Features and Benefits:

Quality of Service (QoS)

Traffic prioritization (IEEE 802.1p) allows real-time traffic classification with support for eight priority levels mapped to either two or four queues, and uses weighted deficit round robin (WDRR) or strict priority
Simplified quality of service (QoS) configuration
- Port-based prioritizes traffic by specifying a port and priority level
- VLAN-based prioritizes traffic by specifying a VLAN and priority level
Class of Service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Rate limiting establishes per-port ingress-enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
Layer 4 prioritization enables prioritization based on TCP/UDP port numbers
Flow control helps deliver reliable communication during full-duplex operation

Management

NEW Zero-Touch ProVisioning (ZTP) uses settings in DHCP to enable ZTP with Aruba AirWave Network Management
Choice of management interfaces
- HTML-based easy-to-use Web GUI allows configuration of the switch from any Web browser
- Robust CLI provides advanced configuration and diagnostics
- Simple network management protocol (SNMPv1/v2c/v3) allows the switch to be managed with a variety of third- party network management applications
Virtual stacking provides single IP address management for up to 16 switches
sFlow® (RFC 3176) delivers wire-speed traffic accounting and monitoring, configured by SNMP and CLI with three terminal encrypted receivers
IEEE 802.1AB Link-Layer Discovery Protocol (LLDP) automates device discovery protocol for easy mapping by network management applications
Logging provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
Port mirroring allows traffic to be mirrored on any port or a network analyzer to assist with diagnostics or detecting network attacks
Remote monitoring (RMON) provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Friendly port names allows assignment of descriptive names to ports
Dual flash images provides independent primary and secondary operating system files for backup while upgrading
Multiple configuration files are easily stored with a flash image
Front-panel LEDs
- Locator LEDs allows users to set the locator LED on a specific switch to turn on, blink, or turn off; and simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
- Per-port LEDs provides an at-a-glance view of the status, activity, speed, and full-duplex operation
- Power and fault LEDs display issues, if any
HPE Comware CLI
- Comware-compatible CLI bridges the experience of HPE Comware CLI users who are using the HPE ProVision software CLI
- Display and fundamental Comware CLI commands are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
- Configuration Comware CLI commands when Comware commands are entered, CLI helps elicit to formulate the correct ProVision software CLI command
Download Software via DHCP adds the option to specify the location of switch software via DHCP
TR-069 support enables zero-touch configuration for switches

Connectivity

IPv6
- IPv6 host allows the switch to be deployed and managed at the edge of an IPv6 network
- Dual stack (IPv4/IPv6) supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6
- MLD snooping forwards IPv6 multicast traffic to appropriate interface; prevents IPv6 multicast traffic from flooding the network
- IPv6 ACL/QoS supports ACL and QoS for IPv6 network traffic on Gigabit and 48 port 10/100 models
- Security RA Guard, DHCPv6 Protection, Dynamic IPv6 Lockdown (YA only)
IEEE 802.3af Power over Ethernet (PoE) provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
IEEE 802.3at PoE+ provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (refer to the product specifications for the total PoE power availability)
Auto-MDIX adjusts automatically for straight-through or crossover cables on all ports
Pre-standard PoE support detects and provides power to pre-standard PoE devices (refer to the list of supported devices in the product FAQs, which can be accessed at www.hpe.com/networking/support)
SFP slots provides fiber connectivity such as Gigabit-SX, LX, LH, and BX with four SFP slots on all 24- and 48-port Gigabit Ethernet models. Fast Ethernet 24- and 48-port models have two SFP slots and two RJ-45 Gigabit uplinks; 8-port models have two dual-personality ports supporting either SFP or RJ-45 Gigabit uplinks
Dual-personality (RJ-45 or USB micro-B) serial console port gives easy access to switch CLI with front-of-switch location and the flexibility of using either an RJ-45 or USB micro-B serial console port

Layer 2 switching

VLANs provides support for 512 VLANs and 4,094 VLAN IDs
Jumbo packet support supports up to 9,220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2,000-byte frames with no configuration needed
16K MAC address table provides access to many Layer 2 devices
GARP VLAN Registration Protocol allows automatic learning and dynamic assignment of VLANs
Rapid Per-VLAN Spanning Tree (RPVST+) allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

Security

ACLs accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48- port models.)
Source-port filtering allows only specified ports to communicate with each other
RADIUS/TACACS+ eases switch management security administration by using a password authentication server
Secure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Port security allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout prevents particular configured MAC addresses from connecting to the network
Multiple user authentication methods
- IEEE 802.1X uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards
- Web-based authentication provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE 802.1X supplicant
- MAC-based authentication authenticates the client with the RADIUS server based on the client’s MAC address
Secure shell (SSH) v2 encrypts all transmitted data for secure remote CLI access over IP networks
Secure shell encrypts all transmitted data for secure remote CLI access over IP networks
STP BPDU port protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP root guard protects the root bridge from malicious attacks or configuration mistakes
Secure management access delivers protected encryption of all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3
Custom banner displays security policy when users log in to the switch
Secure FTP allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
Protected ports CLI offers intuitive CLI to configure the source-port filter feature, by allowing specified ports to be isolated from all other ports on the switch; the protected port or ports can communicate only with the uplink or shared resources
Authentication flexibility
- Multiple IEEE 802.1X users per port provides authentication for up to 32 IEEE 802.1X users per port; prevents a user from “piggybacking” on another user’s IEEE 802.1X authentication
- Concurrent IEEE 802.1X and Web or MAC authentication schemes per port allows a switch port to accept any IEEE 802.1X and either Web or MAC authentications
Switch management logon security helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
DHCP protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
Dynamic IP lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing

Convergence

IEEE 802.1AB Link Layer Discovery Protocol (LLDP) facilitates easy mapping using network management applications with LLDP automated device discovery protocol
LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
IP multicast (data-driven IGMP) prevents flooding of IP multicast traffic
PoE and PoE+ allocations support multiple methods— automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified—to allocate and manage PoE/PoE+ power for more efficient energy use
Voice VLAN uses LLDP-MED to automatically configure a VLAN for IP phones
IP multicast (data-driven IGMPv3) prevents flooding of IP multicast traffic
LLDP-CDP compatibility receives and recognizes CDP packets from Cisco’s IP phones for seamless interoperation
Local MAC Authentication assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes Unified Wired and Wireless
HTTP redirect function supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution

Resiliency and high availability

Port trunking and link aggregation
- Trunking supports up to eight links per trunk to increase bandwidth and create redundant connections; and supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models.)
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) eases configuration of trunks through automatic configuration
IEEE 802.1s Multiple Spanning Tree provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
SmartLink provides easy-to-configure link redundancy of active and standby links

Product architecture

Energy-efficient design
- IEEE 802.3az reduces power consumption during periods of low data activity on Gigabit Ethernet switches
- Port low-power mode enables the port to automatically go into low-power mode to conserve energy when no link is detected
- Fan-less and variable-speed fans decreases power consumption in fan-less (all 8-port, 2530-24, and 2530- 48 PoE+ switches) as well as variable-speed fan switches
- Port LEDs conserves energy by optionally turning off port link and activity LEDs
Switch on a chip provides a highly integrated, high- performance switch design with a nonblocking architecture

Flexibility

Flexible mounting
- Rack mountable allows the switch to be mounted on a standard 19-inch rack, with the hardware included
- Wall mountable allows the switch to be mounted on a wall, using the hardware included
- Surface mountable allows the switch to be mounted above or below a surface (such as a desk or table), using the hardware included
Quiet operation lowers noise, making it suitable for deployments in acoustically sensitive environments such as conference rooms and office spaces
Compact size reduces space requirements (refer to the product specifications for the exact dimensions)

Warranty and support

Limited Lifetime Warranty See www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
Software releases to find software for your product, refer to www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to www.hpe.com/networking/warrantysummary

Specifications:

2530 Series Specifications
Physical Interfaces 2530-48G-PoE+ Switch (J9772A): 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 fixed Gigabit Ethernet SFP ports 2530-24G-PoE+ Switch (J9773A): 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 fixed Gigabit Ethernet SFP ports 2530-8G-PoE+ Switch (J9774A): 8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) 2530-48-PoE+ Switch (J9778A): 48 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 fixed Gigabit Ethernet SFP ports 2530-24-PoE+ Switch (J9779A): 24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 fixed Gigabit Ethernet SFP ports 2530-8-PoE+ Switch (J9780A): 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports 2530-48G Switch (J9775A): 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 fixed Gigabit Ethernet SFP ports 2530-24G Switch (J9776A): 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 fixed Gigabit Ethernet SFP ports 2530-8G Switch (J9777A): 8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports 2530-48 Switch (J9781A): 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 fixed Gigabit Ethernet SFP ports 2530-24 Switch (J9782A): 24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 fixed Gigabit Ethernet SFP ports 2530-8 Switch (J9783A): 8 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports 2530-48G-PoE+-2SFP+ Switch (J9853A): 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ fixed 1000/10000 SFP+ ports 2530-24G-PoE+-2SFP+ Switch (J9854A): 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ fixed 1000/10000 SFP+ ports 2530-48G-2SFP+ Switch (J9855A): 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ fixed 1000/10000 SFP+ ports 2530-24G-2SFP+ Switch (J9856A): 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ fixed 1000/10000 SFP+ ports 2530-8-PoE+ Internal PS Switch (JL070A): 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports Additional ports and slots 1 dual-personality (RJ-45 or USB micro-B) serial console port Memory and processor ARM9E @ 800 MHz, 128 MB flash Packet buffer size: 3 MB (48G switches only) or 1.5 Mb dynamically allocated 256 MB DDR3 DIMM Dimensions 2530-48G-PoE+ Switch (J9772A): (H) 4.45 cm x (W) 32.26 cm x (D) 25.40 cm (1.75” x 17.44” x 13.00”) (1U height) Weight: 10.4 lb (4.72 kg) 2530-24G-PoE+ Switch (J9773A): (H) 4.45 cm x (W) 32.26 cm x (D) 25.40 cm (1.75” x 17.44” x 13.00”) (1U height) Weight: 8.7 lb (3.95 kg) 2530-8G-PoE+ Switch (J9774A): (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height) Weight: 2.2 lb (1 kg) 2530-48-PoE+ Switch (J9778A): (H) 4.45 cm x (W) 44.20 cm x (D) 32.26 cm (1.75” x 17.40” x 12.70”) (1U height) Weight: 10.1 lb (4.58 kg) 2530-24-PoE+ Switch (J9779A): (H) 4.45 cm x (W) 44.20 cm x (D) 32.26 cm (1.75” x 17.40” x 12.70”) (1U height) Weight: 8.4 lb (3.81 kg) 2530-8-PoE+ Switch (J9780A): (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height) Weight: 2.0 lb (0.91 kg) 2530-48G Switch (J9775A): (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height) Weight: 6.8 lb (3.08 kg) 2530-24G Switch (J9776A): (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height) Weight: 6.1 lb (2.77 kg) 2530-8G Switch (J9777A): (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height) Weight: 2.0 lb (0.91 kg) 2530-48 Switch (J9781A): (H) 4.45 cm x (W) 44.20 cm x (D) 24.64 cm (1.75” x 17.40” x 9.70”) (1U height) Weight: 6.3 lb (2.86 kg) 2530-24 Switch (J9782A): (H) 4.45 cm x (W) 44.20 cm x (D) 24.64 cm (1.75” x 17.40” x 9.70”) (1U height) Weight: 5.7 lb (2.59 kg) 2530-8 Switch (J9783A): (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height) Weight: 1.8 lb (0.82 kg) 2530-48G-PoE+-2SFP+ Switch (J9853A): (H) 4.45 cm x (W) 44.30 cm x (D) 32.26 cm (1.75” x 17.44” x 13.00”) (1U height) Weight: 10.4 lb (4.72 kg) 2530-24G-PoE+-2SFP+ Switch (J9854A): (H) 4.45 cm x (W) 44.30 cm x (D) 33.02 cm (1.75” x 17.44” x 13.00”) (1U height) Weight: 8.6 lb (3.9 kg) 2530-48G-2SFP+ Switch (J9855A): (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height) Weight: 7.1 lb (3.08 kg) 2530-24G-2SFP+ Switch (J9856A): (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height) Weight: 6.2 lb (2.81 kg) 2530-8-PoE+ Internal PS Switch (JL070A): (H) 4.45 cm x (W) 25.40 cm x (D) 24.59 cm (1.75” x 10.00” x 9.68”) (1U height) Weight: 4.65 lb (2.11 kg) Mounting and enclosure Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); Horizontal surface mounting; Wall mounting	Performance IPv6 Ready Certified MAC address table size: 16000 entries 2530-48G-PoE+ Switch (J9772A): 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets) Throughput: up to 77.3 Mpps (64-byte packets) Switching capacity: 104 Gbps 2530-24G-PoE+ Switch (J9773A): 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets) Throughput: up to 41.6 Mpps (64-byte packets) Switching capacity: 56 Gbps 2530-8G-PoE+ Switch (J9774A): 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.6 µs (LIFO 64-byte packets) Throughput: up to 14.8 Mpps (64-byte packets) Switching capacity: 20 Gbps 2530-48-PoE+ Switch (J9778A): 100 Mb Latency: < 6.6 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.2 µs (LIFO 64-byte packets) Throughput: up to 13 Mpps (64-byte packets) Switching capacity: 17.6 Gbps 2530-24-PoE+ Switch (J9779A): 100 Mb Latency: < 1.7 µs (LIFO 64-byte packets) 1000 Mb Latency: < 1.1 µs (LIFO 64-byte packets) Throughput: up to 9.5 Mpps (64-byte packets) Switching capacity: 12.8 Gbps 2530-8-PoE+ Switch (J9780A): 100 Mb Latency: < 1.3 µs (LIFO 64-byte packets) 1000 Mb Latency: < 1.3 µs (LIFO 64-byte packets) Throughput: up to 4.1 Mpps (64-byte packets) Switching capacity: 5.6 Gbps 2530-48G Switch (J9775A): 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets) Throughput: up to 77.3 Mpps (64-byte packets) Switching capacity: 104 Gbps 2530-24G Switch (J9776A): 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets) Throughput: up to 41.6 Mpps (64-byte packets) Switching capacity: 56 Gbps 2530-8G Switch (J9777A): 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.6 µs (LIFO 64-byte packets) Throughput: up to 14.8 Mpps (64-byte packets) Switching capacity: 20 Gbps 2530-48 Switch (J9781A): 100 Mb Latency: < 6.6 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.2 µs (LIFO 64-byte packets) Throughput: up to 13 Mpps (64-byte packets) Switching capacity: 17.6 Gbps 2530-24 Switch (J9782A): 100 Mb Latency: < 1.7 µs (LIFO 64-byte packets) 1000 Mb Latency: < 1.1 µs (LIFO 64-byte packets) Throughput: up to 9.5 Mpps (64-byte packets) Switching capacity: 12.8 Gbps 2530-8 Switch (J9783A): 100 Mb Latency: < 1.3 µs (LIFO 64-byte packets) 1000 Mb Latency: < 1.3 µs (LIFO 64-byte packets) Throughput: up to 4.1 Mpps (64-byte packets) Switching capacity: 5.6 Gbps 2530-48G-PoE+-2SFP+ Switch (J9853A): 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets) 10 Gbps Latency: < 4.0 µs (LIFO 64-byte packets) Throughput: up to 101 Mpps (64-byte packets) Switching capacity: 136 Gbps 2530-24G-PoE+-2SFP+ Switch (J9854A): 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets) 10 Gbps Latency: < 2.2 µs (LIFO 64-byte packets) Throughput: up to 65.4 Mpps (64-byte packets) Switching capacity: 88 Gbps 2530-48G-2SFP+ Switch (J9855A): 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets) 10 Gbps Latency: < 4.0 µs (LIFO 64-byte packets) Throughput: up to 101 Mpps (64-byte packets) Switching capacity: 136 Gbps 2530-24G-2SFP+ Switch (J9856A): 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets) 10 Gbps Latency: < 2.2 µs (LIFO 64-byte packets) Throughput: up to 65.4 Mpps (64-byte packets) Switching capacity: 88 Gbps 2530-8-PoE+ Internal PS Switch (JL070A): 100 Mb Latency: < 1.3 µs (LIFO 64-byte packets) 1000 Mb Latency: < 1.3 µs (LIFO 64-byte packets) Throughput: up to 4.1 Mpps (64-byte packets) Switching capacity: 5.6 Gbps Environmental Operating temperature range: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 15% to 95% @ 40°C (104°F), noncondensing Storage temperature range: -40°C to 70°C (-40°F to 158°F) Storage humidity: 15% to 90% @ 65°C (149°F), non-condensing Operating altitude: 10,000 feet (3km) Acoustic: See data sheet Electrical characteristics Frequency: 50/60 Hz Voltage: 100 - 127 / 200 - 240 VAC, rated (depending on power supply chosen) Maximum heat dissipation: See data sheet Current: See data sheet Maximum power rating: See data sheet Idle power: See data sheet PoE power: See data sheet Notes: Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. For PoE Models only: PoE power is the total power budget available to all PoE ports. Safety Certifications UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1 EN 60825 Emissions FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A Immunity Generic/EN: EN 55024, CISPR 24 ESD: IEC 61000-4-2 Radiated: IEC 61000-4-3 EFT/Burst: IEC 61000-4-4 Surge: IEC 61000-4-5 Conducted: IEC 61000-4-6 Power frequency magnetic field: IEC 61000-4-8 Voltage dips and interruptions: IEC 61000-4-11 Harmonics: EN 61000-3-2, IEC 61000-3-2 Flicker: EN 61000-3-3, IEC 61000-3-3 Management And Monitoring Command line interface Graphical user interface (Web browser) AirWave network platform IMC - Intelligent Management Center Configuration menu Out-of-band management (serial RS-232c or micro usb) IEEE 802.3 Ethernet mib; Repeater mib; Ethernet interface mib Warranty And Support Limited lifetime warranty See www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase. Software releases to find software for your product, refer to www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to www.hpe.com/networking/warrantysummary. Notes IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

2530 Series Specifications

Physical Interfaces

2530-48G-PoE+ Switch (J9772A):
- 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 fixed Gigabit Ethernet SFP ports
2530-24G-PoE+ Switch (J9773A):
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 fixed Gigabit Ethernet SFP ports
2530-8G-PoE+ Switch (J9774A):
- 8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers)
2530-48-PoE+ Switch (J9778A):
- 48 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full
- 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 fixed Gigabit Ethernet SFP ports
2530-24-PoE+ Switch (J9779A):
- 24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full
- 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 fixed Gigabit Ethernet SFP ports
2530-8-PoE+ Switch (J9780A):
- 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full
- 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports
2530-48G Switch (J9775A):
- 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 fixed Gigabit Ethernet SFP ports
2530-24G Switch (J9776A):
- 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 fixed Gigabit Ethernet SFP ports
2530-8G Switch (J9777A):
- 8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports
2530-48 Switch (J9781A):
- 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
- 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 fixed Gigabit Ethernet SFP ports
2530-24 Switch (J9782A):
- 24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
- 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 fixed Gigabit Ethernet SFP ports
2530-8 Switch (J9783A):
- 8 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
- 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports
2530-48G-PoE+-2SFP+ Switch (J9853A):
- 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 SFP+ fixed 1000/10000 SFP+ ports
2530-24G-PoE+-2SFP+ Switch (J9854A):
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 SFP+ fixed 1000/10000 SFP+ ports
2530-48G-2SFP+ Switch (J9855A):
- 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 SFP+ fixed 1000/10000 SFP+ ports
2530-24G-2SFP+ Switch (J9856A):
- 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 SFP+ fixed 1000/10000 SFP+ ports
2530-8-PoE+ Internal PS Switch (JL070A):
- 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full
- 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports

Additional ports and slots

1 dual-personality (RJ-45 or USB micro-B) serial console port

Memory and processor

ARM9E @ 800 MHz, 128 MB flash
Packet buffer size: 3 MB (48G switches only) or 1.5 Mb dynamically allocated
256 MB DDR3 DIMM

Dimensions

2530-48G-PoE+ Switch (J9772A):
- (H) 4.45 cm x (W) 32.26 cm x (D) 25.40 cm (1.75” x 17.44” x 13.00”) (1U height)
- Weight: 10.4 lb (4.72 kg)
2530-24G-PoE+ Switch (J9773A):
- (H) 4.45 cm x (W) 32.26 cm x (D) 25.40 cm (1.75” x 17.44” x 13.00”) (1U height)
- Weight: 8.7 lb (3.95 kg)
2530-8G-PoE+ Switch (J9774A):
- (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height)
- Weight: 2.2 lb (1 kg)
2530-48-PoE+ Switch (J9778A):
- (H) 4.45 cm x (W) 44.20 cm x (D) 32.26 cm (1.75” x 17.40” x 12.70”) (1U height)
- Weight: 10.1 lb (4.58 kg)
2530-24-PoE+ Switch (J9779A):
- (H) 4.45 cm x (W) 44.20 cm x (D) 32.26 cm (1.75” x 17.40” x 12.70”) (1U height)
- Weight: 8.4 lb (3.81 kg)
2530-8-PoE+ Switch (J9780A):
- (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height)
- Weight: 2.0 lb (0.91 kg)
2530-48G Switch (J9775A):
- (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height)
- Weight: 6.8 lb (3.08 kg)
2530-24G Switch (J9776A):
- (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height)
- Weight: 6.1 lb (2.77 kg)
2530-8G Switch (J9777A):
- (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height)
- Weight: 2.0 lb (0.91 kg)
2530-48 Switch (J9781A):
- (H) 4.45 cm x (W) 44.20 cm x (D) 24.64 cm (1.75” x 17.40” x 9.70”) (1U height)
- Weight: 6.3 lb (2.86 kg)
2530-24 Switch (J9782A):
- (H) 4.45 cm x (W) 44.20 cm x (D) 24.64 cm (1.75” x 17.40” x 9.70”) (1U height)
- Weight: 5.7 lb (2.59 kg)
2530-8 Switch (J9783A):
- (H) 4.45 cm x (W) 25.40 cm x (D) 15.95 cm (1.75” x 10.00” x 6.28”) (1U height)
- Weight: 1.8 lb (0.82 kg)
2530-48G-PoE+-2SFP+ Switch (J9853A):
- (H) 4.45 cm x (W) 44.30 cm x (D) 32.26 cm (1.75” x 17.44” x 13.00”) (1U height)
- Weight: 10.4 lb (4.72 kg)
2530-24G-PoE+-2SFP+ Switch (J9854A):
- (H) 4.45 cm x (W) 44.30 cm x (D) 33.02 cm (1.75” x 17.44” x 13.00”) (1U height)
- Weight: 8.6 lb (3.9 kg)
2530-48G-2SFP+ Switch (J9855A):
- (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height)
- Weight: 7.1 lb (3.08 kg)
2530-24G-2SFP+ Switch (J9856A):
- (H) 4.45 cm x (W) 44.30 cm x (D) 25.40 cm (1.75” x 17.44” x 10.00”) (1U height)
- Weight: 6.2 lb (2.81 kg)
2530-8-PoE+ Internal PS Switch (JL070A):
- (H) 4.45 cm x (W) 25.40 cm x (D) 24.59 cm (1.75” x 10.00” x 9.68”) (1U height)
- Weight: 4.65 lb (2.11 kg)

Mounting and enclosure

Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); Horizontal surface mounting; Wall mounting

Performance

IPv6 Ready Certified
MAC address table size: 16000 entries
2530-48G-PoE+ Switch (J9772A):
- 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets)
- Throughput: up to 77.3 Mpps (64-byte packets)
- Switching capacity: 104 Gbps
2530-24G-PoE+ Switch (J9773A):
- 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets)
- Throughput: up to 41.6 Mpps (64-byte packets)
- Switching capacity: 56 Gbps
2530-8G-PoE+ Switch (J9774A):
- 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.6 µs (LIFO 64-byte packets)
- Throughput: up to 14.8 Mpps (64-byte packets)
- Switching capacity: 20 Gbps
2530-48-PoE+ Switch (J9778A):
- 100 Mb Latency: < 6.6 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.2 µs (LIFO 64-byte packets)
- Throughput: up to 13 Mpps (64-byte packets)
- Switching capacity: 17.6 Gbps
2530-24-PoE+ Switch (J9779A):
- 100 Mb Latency: < 1.7 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 1.1 µs (LIFO 64-byte packets)
- Throughput: up to 9.5 Mpps (64-byte packets)
- Switching capacity: 12.8 Gbps
2530-8-PoE+ Switch (J9780A):
- 100 Mb Latency: < 1.3 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 1.3 µs (LIFO 64-byte packets)
- Throughput: up to 4.1 Mpps (64-byte packets)
- Switching capacity: 5.6 Gbps
2530-48G Switch (J9775A):
- 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets)
- Throughput: up to 77.3 Mpps (64-byte packets)
- Switching capacity: 104 Gbps
2530-24G Switch (J9776A):
- 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets)
- Throughput: up to 41.6 Mpps (64-byte packets)
- Switching capacity: 56 Gbps
2530-8G Switch (J9777A):
- 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.6 µs (LIFO 64-byte packets)
- Throughput: up to 14.8 Mpps (64-byte packets)
- Switching capacity: 20 Gbps
2530-48 Switch (J9781A):
- 100 Mb Latency: < 6.6 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.2 µs (LIFO 64-byte packets)
- Throughput: up to 13 Mpps (64-byte packets)
- Switching capacity: 17.6 Gbps
2530-24 Switch (J9782A):
- 100 Mb Latency: < 1.7 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 1.1 µs (LIFO 64-byte packets)
- Throughput: up to 9.5 Mpps (64-byte packets)
- Switching capacity: 12.8 Gbps
2530-8 Switch (J9783A):
- 100 Mb Latency: < 1.3 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 1.3 µs (LIFO 64-byte packets)
- Throughput: up to 4.1 Mpps (64-byte packets)
- Switching capacity: 5.6 Gbps
2530-48G-PoE+-2SFP+ Switch (J9853A):
- 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets)
- 10 Gbps Latency: < 4.0 µs (LIFO 64-byte packets)
- Throughput: up to 101 Mpps (64-byte packets)
- Switching capacity: 136 Gbps
2530-24G-PoE+-2SFP+ Switch (J9854A):
- 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets)
- 10 Gbps Latency: < 2.2 µs (LIFO 64-byte packets)
- Throughput: up to 65.4 Mpps (64-byte packets)
- Switching capacity: 88 Gbps
2530-48G-2SFP+ Switch (J9855A):
- 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets)
- 10 Gbps Latency: < 4.0 µs (LIFO 64-byte packets)
- Throughput: up to 101 Mpps (64-byte packets)
- Switching capacity: 136 Gbps
2530-24G-2SFP+ Switch (J9856A):
- 100 Mb Latency: < 7.3 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.7 µs (LIFO 64-byte packets)
- 10 Gbps Latency: < 2.2 µs (LIFO 64-byte packets)
- Throughput: up to 65.4 Mpps (64-byte packets)
- Switching capacity: 88 Gbps
2530-8-PoE+ Internal PS Switch (JL070A):
- 100 Mb Latency: < 1.3 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 1.3 µs (LIFO 64-byte packets)
- Throughput: up to 4.1 Mpps (64-byte packets)
- Switching capacity: 5.6 Gbps

Environmental

Operating temperature range: 0°C to 45°C (32°F to 113°F)
Operating relative humidity: 15% to 95% @ 40°C (104°F), noncondensing
Storage temperature range: -40°C to 70°C (-40°F to 158°F)
Storage humidity: 15% to 90% @ 65°C (149°F), non-condensing
Operating altitude: 10,000 feet (3km)
Acoustic: See data sheet

Electrical characteristics

Frequency: 50/60 Hz
Voltage: 100 - 127 / 200 - 240 VAC, rated (depending on power supply chosen)
Maximum heat dissipation: See data sheet
Current: See data sheet
Maximum power rating: See data sheet
Idle power: See data sheet
PoE power: See data sheet
Notes:
- Idle power is the actual power consumption of the device with no ports connected.
- Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
- For PoE Models only: PoE power is the total power budget available to all PoE ports.

Safety Certifications

UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1
EN 60825

Emissions

FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Immunity

Generic/EN: EN 55024, CISPR 24
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: EN 61000-3-2, IEC 61000-3-2
Flicker: EN 61000-3-3, IEC 61000-3-3

Management And Monitoring

Command line interface
Graphical user interface (Web browser)
AirWave network platform
IMC - Intelligent Management Center
Configuration menu
Out-of-band management (serial RS-232c or micro usb)
IEEE 802.3 Ethernet mib; Repeater mib; Ethernet interface mib

Warranty And Support

Limited lifetime warranty
See www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
Software releases
to find software for your product, refer to www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to www.hpe.com/networking/warrantysummary.

Notes

IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

Documentation:

Aruba 2530 Series Datasheet (.PDF)

Aruba 2530 8 Switch (J9783A)
Secure and reliable Layer 2 access switch

Overview:

Key Features

Features and Benefits:

Specifications:

Physical Interfaces

Additional ports and slots

Memory and processor

Dimensions

Mounting and enclosure

Performance

Environmental

Electrical characteristics

Safety Certifications

Emissions

Immunity

Management And Monitoring

Warranty And Support

Notes

Documentation:

Get a Quote!

Aruba 2530 8 Switch (J9783A) Secure and reliable Layer 2 access switch

Overview:

Key Features

Features and Benefits:

Specifications:

Physical Interfaces

Additional ports and slots

Memory and processor

Dimensions

Mounting and enclosure

Performance

Environmental

Electrical characteristics

Safety Certifications

Emissions

Immunity

Management And Monitoring

Warranty And Support

Notes

Documentation:

Aruba 2530 8 Switch (J9783A)
Secure and reliable Layer 2 access switch