Aruba AP-584 Outdoor Access Point
Ultimate Wi-Fi 6 performance with high power Bluetooth and Zigbee radios and 5 Gbps Ethernet for the most demanding outdoor locations.

Aruba Networks Products

Aruba Wireless Outdoor Access Point

Aruba AP-584 Dual Radio 4x4:4 802.11ax External Antennas Unified Outdoor AP

#R7S99A
List Price: ~~$3,845.00~~
Our Price: $2,764.17

Aruba AP-584 TAA Dual Radio 4x4:4 802.11ax External Antennas Unified Outdoor AP

#R7T14A
List Price: ~~$4,725.00~~
Our Price: $3,396.81

Click here to jump to more pricing!

Overview:

Ultimate Wi-Fi 6 performance with high power Bluetooth and Zigbee radios and 5 Gbps Ethernet for the most demanding outdoor locations.

Purpose-built to survive in the harshest outdoor environments, Aruba 580 Series Outdoor Access Points are designed for the highest levels of performance and greater deployment flexibility – all backed by a limited lifetime warranty. Aruba 580 Series APs deliver the speed and reliability needed for large enterprise and Industrial IoT deployments with high power Bluetooth and 802.15.4/Zigbee radios and flexible power options.

Designed For Outdoor Flexibility

Weatherproofed, and temperature hardened to survive in the harshest outdoor environments, Aruba 580 Series APs withstand exposure to extreme high and low temperatures, persistent moisture, and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial surge protection and are IP66/67 certified.

To support high-performance connectivity in dense mobile and IoT outdoor environments, Aruba 580 Series APs deliver maximum aggregate on air data rates of 2.97 Gbps and include 5 Gbps Smart Rate Ethernet ports. In addition, dual redundant power/port failover and support for AC ensure high availability with uninterrupted performance.

Available Models for 580 Series

Aruba AP-584

Four dual-band Nf connectors for external antenna operation
One 2.4Ghz IoT Nf connector for the Bluetooth/Zigbee radio
5dBi omni-directional antenna included

Aruba AP-585

Built in omni-directional antennas (H and V polarized)
5Ghz Antennas 4.5dBi uncorrelated avg (5.8dBi peak)
2.4GHz Antennas 3.0dBi uncorrelated avg (4.4dBi peak)
Bluetooth Antenna 4.8dBi peak

Aruba AP-587

Built in directional antennas (H, V, and +/-45 polarized)
5Ghz Antennas 5.2dBi uncorrelated avg (6.6dBi peak)
2.4Ghz Antennas 5.7dBi uncorrelated avg (5.8dBi peak)
Bluetooth Antenna 6.3dBi peak

The ultimate in Wi-Fi 6 performance for the harshest outdoor environments

Our only outdoor AP to feature high power Bluetooth and Zigbee, plus multi-gigabit connectivity for demanding environments including public venues.

IP66/67 Rated for Harsh Outdoor Environments

Purpose built to survive in the harshest outdoor environments and extreme temperatures (-40 to +65˚ C).

High power Bluetooth 5 and 802.15.4/Zigbee

Simplified deployment and management of IoT devices for Industrial IoT and manufacturing environments.

Wi-Fi 6 supported

Improve efficiency and security with Wi-Fi 6 capabilities including MU-MIMO, OFDMA, WPA3 and Enhanced Open (Wi-Fi Alliance certification in process).

Automatic role-based access enforcement

Centrally configure and automatically enforce role-based policies across wired and wireless networks using Dynamic Segmentation and Policy Enforcement Firewalls.

5 Gbps Smart Rate Ethernet

With 5 Gbps capacity, the Aruba 580 Series meets the needs of high-density environments and provides business continuity.

Powerful power options

Option to connect using direct AC power – no adapter required – along with PSE+ and PoE.

Features and Benefits:

WI-FI 6 BENEFITS

The 580 Series APs are based on the Wi-Fi 6/802.11ax standard, which means that Wi-Fi 6 features such as Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), BSS coloring, Downlink Multi-User MIMO (MU-MIMO), and cellular co-location are fully supported making it more efficient and secure.

Advantages of OFDMA
This capability allows Aruba’s APs to handle multiple 802.11ax capable clients on each channel simultaneously, regardless of device or traffic type. Channel utilization is optimized by handling each transaction via smaller sub-carriers or resource units (RUs), which means that clients are sharing a channel and not competing for airtime and bandwidth.

Bi-directional Multi-User MIMO (MU-MIMO)
Similar to downlink MU-MIMO in Wi-Fi 5 (802.11ac Wave 2), Aruba 580 Series APs can simultaneously connect clients using downlink – and now – uplink spatial streams. The added benefit is the ability to multiply the number of clients that can now send traffic, thus optimizing client-to-AP spatial stream diversity.

WI-FI OPTIMIZATION

Client optimization
Aruba’s patented AI-powered ClientMatch technology eliminates sticky client issues by steering a client to the AP where it receives the best radio signal. ClientMatch also dynamically teers traffic to load balance APs to improve the user experience.

Automated Wi-Fi radio frequency management
To optimize the user experience and provide greater stability, Aruba AirMatch allows organizations to automate network optimization using machine learning. AirMatch provides dynamic bandwidth adjustments to support changing device density and enhanced roaming using an even distribution of Effective Isotropic Radiated Power (EIRP) to radios, and real-time channel assignments to mitigate co-channel interference.

Application assurance
With Air Slice, organizations can provide application assurance to their users that goes beyond the traditional capabilities of airtime fairness. After the SLAs are configured, Air Slice monitors network usage, automatically allocates radio resources, and dynamically adjusts radio resources as new users connect and applications sessions begin or end.

Intelligent Power Monitoring (IPM)
Aruba 580 Series APs continuously monitor and report hardware energy consumption and temperature. APs can be configured to enable or disable capabilities based on the available PoE power – ideal when wired switches have exhausted their power budget. Additionally, with IPM, if the AP gets too close to the maximum temperature limit, it can disable features to prevent overheating.

Aruba Advanced Cellular Coexistence (ACC)
Unique to Aruba, Advanced Cellular Coexistence uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.

IOT CAPABILITIES

High power Bluetooth and Zigbee
The Aruba 580 Series is the first Aruba access point to feature a high-powered Bluetooth and 802.15.4/Zigbee radio, ensuring maximum range and performance for IoT applications. Built in Bluetooth and Zigbee capabilities simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors and allows organizations to leverage the Aruba 580 Series as an IoT platform. There is no need for an overlay infrastructure or additional IT resources.

Advanced IoT coexistence (AIC)
Built-in filtering allows Wi-Fi and Bluetooth/Zigbee radios to operate at maximum capacity without the impact of interference.

Target Wake Time (TWT)
Ideal for IoT solutions that communicate infrequently, this Wi-Fi 6 capability allows IoT devices to use 802.11ax protocol. TWT coordinates with client IoT devices to allow them to sleep for extended periods and use shorter wake times to communicate before returning to sleep. This substantially extends the useful operating life of Wi-Fi 6 based, batterypowered sensors.

ARUBA SECURE INFRASTRUCTURE

The Aruba 580 Series is an integral part of Aruba’s SASE and zero trust security approach to help protect user authentication and wireless traffic. Select capabilities include:

WPA3 and Enhanced Open
With the introduction of WPA3 and Enhanced Open, a Wi-Fi 6 certified client will never send unencrypted traffic over the air. Even with an open authenticated network, Enhanced Open still provides strong encryption over the air. In all Wi‑Fi 6 user sessions, each user is uniquely encrypted and if they disconnect and reconnect, the encryption changes from session to session.

WPA2-MPSK
MPSK enables simpler passkey management for WPA2 devices – should the Wi-Fi password on one device change, no additional changes are needed for other devices. This feature is enabled when networks are deployed with ClearPass Policy Manager.

SIMPLE AND SECURE ACCESS

To improve security and ease of management, IT can centrally configure and automatically enforce role-based policies that define proper access privileges for employees, guests, contractors, and other user groups – no matter where users connect on wired and wireless networks. Dynamic Segmentation eliminates the time consuming and error-prone task of managing complex and static VLANs, ACLs, and subnets by dynamically assigning policies and keeping traffic secure and separated.

FLEXIBLE OPERATION AND MANAGEMENT

Our unified APs can operate as standalone access points or with a gateway for greater scalability, security, and manageability. APs can be deployed using zero touch provisioning – without on-site technical expertise – for ease of implementation. Aruba APs can be managed using cloud-based or on premises solutions for any campus, branch, or remote work environment. As the management and orchestration console for Aruba ESP (Edge Services Platform), Aruba Central provides a single pane of glass for overseeing every aspect of wired and wireless LANs, WANs, and VPNs. AI-powered analytics, end-to-end orchestration and automation, and advanced security features are built natively into the solution.

ADDITIONAL WI-FI FEATURES

Transmit Beamforming (TxBF)
Increased signal reliability and range

Passpoint Release 2
Seamless cellular-to-Wi-Fi carryover for guests

Dynamic Frequency Selection (DFS)
Optimized use of available RF spectrum

Maximal Ratio Combining (MRC)
Improved receiver performance for multi antenna access points.

Cyclic Delay/Shift Diversity (CDD/CSD)
Enable use of multiple transmit antennas

Space-Time Block Coding (STBC)
Increased connection robustness

Low-Density Parity Check (LDPC)
High performance error detection and correction coding for enhanced receiver performance

Key Features:

Dual-radio (dual 4x4 MIMO) high-power 802.11ax AP with up-and downlink OFDMA and Multi-User MIMO (MUMIMO)
Maximum combined data rates of 2.9Gbps (HE80/HE20) in the most real-world settings, with a maximum 5GHz throughput of 2.4Gbps in 4SS HE80 (or 2SS HE160) and 574Mbps in the 2.4GHz band
Support for 5Gbps NBase-T Ethernet, up to 10Gbps SFP+, and 1Gbps (w/PoE Out)
Operate with 802.3bt Class 6 PoE or AC power, with reduced capabilities on 802.3at using IPM
Ideal for large scale outdoor environments including universities, large enterprises, and industrial applications
High power Bluetooth and Zigbee radio for IoT connectivity with support for maximum range and performance
Aruba Intelligent Power Monitoring (IPM) which allows the AP to operate if there is not enough PoE power as well as manage heat to prevent overheating in the most extreme environments
State of the art security with WPA3 and Enhanced open

Specifications:

HARDWARE VARIANTS
AP-584 Four dual-band Nf connectors for external antenna operation One 2.4Ghz IoT Nf connector for the Bluetooth/Zigbee radio 5dBi omni-directional antenna included AP-585 Built in omni-directional antennas (H and V polarized) 5Ghz Antennas 4.5dBi uncorrelated avg (5.8dBi peak) 2.4GHz Antennas 3.0dBi uncorrelated avg (4.4dBi peak) Bluetooth Antenna 4.8dBi peak AP-587 Built in directional antennas (H, V, and +/-45 polarized) 5Ghz Antennas 5.2dBi uncorrelated avg (6.6dBi peak) 2.4Ghz Antennas 5.7dBi uncorrelated avg (5.8dBi peak) Bluetooth Antenna 6.3dBi peak
WI-FI RADIO SPECIFICATIONS
AP type: Outdoor Hardened, Wi-Fi 6 dual radio, 5GHz and 2.4GHz 802.11ax 4x4 MIMO 5GHz radio: Four spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with individual 4SS HE80 (or 2SS HE160) 802.11ax client devices, or with four 1SS or two 2SS HE80 802.11ax MU-MIMO capable client devices simultaneously 2.4GHz radio: Four spatial stream Single User (SU) MIMO for up to 1,150Mbps wireless data rate with individual 4SS HE40 802.11ax client devices or with two 2SS HE40 802.11ax MU-MIMO capable client devices simultaneously. Support for up to 1,024 associated client devices per radio (typical recommended limit for active outdoor clients is 100-200 depending on distance), and up to 16 BSSIDs per radio Supported frequency bands (country-specific restrictions apply): 2.400 to 2.4835GHz 5.150 to 5.250GHz 5.250 to 5.350GHz 5.470 to 5.725GHz 5.725 to 5.850GHz Available channels: Dependent on configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 37 resource units (for an 80MHz channel) Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension) 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension) 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM 802.11n high-throughput (HT) support: HT20/40 802.11ac very high throughput (VHT) support: VHT20/40/80/160 802.11ax high efficiency (HE) support: HE20/40/80/160 Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (MCS0 to MCS31, HT20 to HT40), 800 with 256-QAM 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160), 2,166 with 1024-QAM 802.11ax (2.4GHz): 3.6 to 1,147 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE40) 802.11ax (5GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160) 802.11n/ac packet aggregation: A-MPDU, A-MSDU Transmit power: Configurable in increments of 0.5 dBm Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): 2.4 GHz band: +29 dBm (23dBm per chain) 5 GHz band: +28 dBm (22 dBm per chain) Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain. Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks Maximum ratio combining (MRC) for improved receiver performance Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased signal reliability and range 802.11ax Target Wait Time (TWT) to support low-power client devices Advanced IoT Existence (AIC) allows for concurrent operation of the IoT and 2.4Ghz radios without issue
WI-FI Antennas
AP-584: Four Nf connectors for external dual band antennas (WIFI0 through WIFI3, corresponding with radio chains 0 through 3), and one Nf connector for BT (includes 5dBi 2.4Ghz omni-directional antenna). Worst-case internal loss between radio interface and external antenna connectors: 0.8dB in 2.4GHz(WiFi), 0.8dB in 2.4GHz(BT) and 1.0dB in 5GHz. AP-585: Four integrated dual-band omni-directional antennas for 4x4 MIMO with peak antenna gain of 4.4dBi in 2.4GHz and 5.8dBi in 5GHz. Built-in antennas are optimized for a horizontally mounted orientation of the AP. The downtilt angle for maximum gain is roughly 10 degrees. A mix of horizontally and vertically polarized antenna elements are used Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 3.0dBi in 2.4GHz and 4.5dBi in 5GHz. AP-587: Four integrated dual-band directional antennas for 4x4 MIMO with peak antenna gain of 5.8dBi in 2.4GHz and 6.6dBi in 5Ghz. Built-in antennas are optimized for a vertically oriented installation to a wall or pole. A mix of horizontal, vertical, and +/-45 degree antenna elements are used Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 5.7dBi in 2.4Ghz, and 5.2dBi in 5Ghz
OTHER INTERFACES
Wired network interface (E0) 100/1000/2500/5000Base-T Ethernet 5Gbps Smart Rate: NBase-T, 802.3bz PoE PD support on E0 IEEE/802.3az support Support for jumbo frames (MTU up to 9,216 bytes) Wired network interface (E1) 10GBASE-R SFP+ port IEEE/802.3az support (as applicable) Support for jumbo frames (up to 9,216 bytes) 1 x SFP+ cage When used in operation it is expected that this is the primary uplink port Only recommended industrial temperature SFP/SFP+ modules should be used for optimal performance Wired network interface (E2) 10/100/1000BaseT Ethernet IEEE/802.3az support (as applicable) Support for jumbo frames (up to 9,216 bytes) Support for PoE PSE of 802.3af (may be able to reach 802.3at PSE with IPM policy if needed depending on temperature and load) AC power interface: 110-240V (requires AP-AC-MLX power connector kit) Bluetooth (BT5.0) and Zigbee (802.15.4) radio BT: up to 8dBm transmit power (class 2) and -98dBm receive sensitivity (125kbps) Zigbee: up to 8dBm transmit power and -96dBm receive sensitivity Visual indictors (multi-color LED): for System and Radio status Reset button: factory reset, LED mode control (normal/off) USB-C console interface Shielded Twisted Pair (STP) Ethernet cable should be used on all Ethernet interfaces for proper surge protection
POWER SOURCES AND POWER CONSUMPTION
The AP supports direct AC power and Power over Ethernet (POE; on port E0 only) When both AC and POE power sources are available, AC power takes priority over POE Power sources are sold separately; see the ordering Information section below for details See below conditions for each power configuration: When powered by AC, the AP will operate without restrictions, including 802.3af/at support (with upper thermal limitations).* With IPM enabled, the AP will adjust power requirements to meet requirements, and will reduce according to established IPM policy When powered by 802.3bt Class 6, the AP will operate without restriction, limited to 802.3af PSE support.* With IPM enabled, the AP will adjust power requirements to meet requirements, and will reduce according to established IPM policy When powered by 802.3bt Class 5 with LLDP, full function but no PSE support* When powered by 802.3at, AP will reduce 2.4Ghz to 1 chain, and will reduce the 5Ghz to 3 chains, no PsE out* When powered by 802.3af, the AP will boot up, but not enable any radios, regardless of IPM settings. With IPM enabled, the AP will adjust power requirements to meet requirements, and will reduce power as necessary according to the established IPM policy Maximum (worst-case) power consumption: AC powered: 71W (802.3af/at*) POE powered (802.3bt Class 6): 49.5W (802.3af PSE only) POE powered (802.3bt Class 5 with LLDP): 35.5W (no PSE) POE powered (802.3at, IPM disabled): 25.5W (1 chain @ 2.4Ghz, 3 chains @ 5Ghz, no PSE) Maximum (worst-case) power consumption in idle mode: 9.2W (POE) or 10.8W (AC) Maximum (worst-case) power consumption in deep-sleep mode: 3.0W (POE) or 4.4W (AC)
MOUNTING DETAILS
AP-OUT-MNT-V1A – Long arm wall or pole mounting bracket AP-270-MNT-H1 – Single-tilt mounting bracket for wall or ceiling AP-270-MNT-H2 – Flush ceiling or wall mounting bracket AP-270-MNT-H3 – Dual-tilt mounting bracket for wall or ceiling
MECHANICAL SPECIFICATIONS
AP-584 Dimensions/weight (AP-584 unit only): 324mm (W) x 312mm (D) x 244mm (H) / 12.6” (W) x 12.3” (D) x 9.6” (H) 5.52kg / 11.5lbs Dimensions/weight (AP-584 shipping pkg, no mount): 410mm (W) x 322mm (D) x 433mm (H) / 16.1” (W) x 12.7” (D) x 17” (H) 7.56kg / 16.8lbs AP-585 Dimensions/weight (AP-585 unit only): 324mm (W) x 313mm (D) x 320mm (H) / 12.6” (W) x 12.3” (D) x 12.7” (H) 5.24kg / 11.5lbs Dimensions/weight (AP-585 shipping pkg, no mount): 431mm (W) x 415mm (D) x 442mm (H) / 17” (W) x 16.3” (D) x 17.4” (H) 7.81kg / 17.2lbs AP-587 Dimensions/weight (AP-587 unit only): 302mm (W) x 300mm (D) x 174mm (H) / 11.9” (W) x 11.8” (D) x 6.9” (H) 4.51kg / 9.9lbs Dimensions/weight (AP-587 shipping pkg, no mount): 385mm (W) x 272mm (D) x 433mm (H) / 15.2” (W) x 10.7” (D) x 17” (H) 6.03kg / 13.3lbs
ENVIRONMENTAL SPECIFICATIONS
Operating conditions: Temperature: -40°C to +65°C / -40°F to +149°F with full solar loading Humidity: 5% to 93% non-condensing internal Rated for operation in all weather conditions Storage and transportationn conditions: Temperature: -40°C to +70°C / -40°F to +158°F Operating Altitude: 3,000 m Water and Dust: IP66/67 Salt Tolerance: Tested to ASTM B117-07A Salt Spray 200hrs
RELIABILITY
Mean Time Between Failure (MTBF): 828,651hrs (~95yrs) at +25°C operating temperature.
REGULATORY COMPLIANCE
FCC/ISED CE Marked RED Directive 2014/53/EU EMC Directive 2014/30/EU Low Voltage Directive 2014/35/EU UL/IEC/EN 60950-1 UL/IEC/EN 62368-1 IEC 60950-22 IEC/EN60601-1-2 EN 50155 For more country-specific regulatory information and approvals, please see your Aruba representative.
REGULATORY MODEL NUMBERS
AP-584: APEX0584 AP-585: APEX0585 AP-587: APEX0587
CERTIFICATIONS
Wi-Fi Alliance: Bluetooth SIG Ethernet Alliance (E0, PoE PD device, class 6; E2, PoE PSE device, class 3)
WARRANTY
Aruba’s hardware limited lifetime warranty.
MINIMUM OPERATING SYSTEM SOFTWARE VERSIONS
ArubaOS and Aruba InstantOS 8.10.0.0

* In some power configurations and conditions, 802.3at may not support the full 30W.

Documentation:

Aruba 580 Series Outdoor Access Points Datasheet (.PDF)

Pricing Notes:

Pricing and product availability subject to change without notice.

Aruba Networks Products

Aruba Wireless Outdoor Access Point

Aruba AP-584 Dual Radio 4x4:4 802.11ax External Antennas Unified Outdoor AP

#R7S99A
List Price: ~~$3,845.00~~
Our Price: $2,764.17

Aruba AP-584 TAA Dual Radio 4x4:4 802.11ax External Antennas Unified Outdoor AP

#R7T14A
List Price: ~~$4,725.00~~
Our Price: $3,396.81

Add Mounting Bracket

The V1 bracket is most commonly used with AP-584/585. The H1, H2 and H3 brackets are most commonly used to wall mount an AP-587 or to hang the AP-584/585 from a horizontal surface. The AP-270-MNT-V2 is not supported.

AP-270-MNT-H1 AP-270 Series Outdoor AP Hanging or Tilt Install Mount Kit

#JW054A
List Price: ~~$140.00~~
Our Price: $101.20

AP-270-MNT-H2 AP-270 Series Access Flush Wall or Ceiling Mount

#JW055A
List Price: ~~$73.00~~
Our Price: $52.76

AP-270-MNT-H3 AP-270 Series Outdoor AP Hanging or Dual-Tilt Install Mount Kit

#R6W11A
List Price: ~~$174.00~~
Our Price: $125.09

Add PoE Powering Accessories for Units To Be PoE Powered

Recommend using Shielded Twister Pair (STP) Ethernet cable for all Ethernet connections for proper surge protection

AP-POE-BTSR 1-Port Smart Rate 802.3bt 60W Indoor Midspan Injector

#R1C73A
List Price: ~~$241.00~~
Our Price: $173.26

PD-9501-5GCO-AC 60W 802.3bt Smart Rate Outdoor Surge Protection Midspan Injector

#R7T40A
List Price: ~~$963.00~~
Our Price: $692.30

Add Mounting Kit For Outdoor PoE Midspan Injector

PD-MOUNT-OD Outdoor PoE Midspan Injectors Pole/Mast Mount Kit

#JW620A
List Price: ~~$155.00~~
Our Price: $112.04

Select 3-Prong AC Power Cord For Indoor PoE Injector

Aruba AC Power Cord

#JW124A
List Price: ~~$7.00~~
Our Price: $5.04

Add Outdoor Power Cable Kit for Units To Be Powered From AC (110/220V)

The AP-AC-MLX is an assembly kit. Tools, power cable type, etc is installer supplied, and should use outdoor rated, UV stabilized AC power cable.

Aruba Outdoor AP-AC-MLX Outdoor Molex AC Power Connector Kit

#R8Q74A
List Price: ~~$105.00~~
Our Price: $75.49

Add SFP For Fiber Connection (Optional)

Aruba 1G I-Tmp SFP LC SX 500m MMF XCVR

#JL780A
List Price: ~~$639.00~~
Our Price: $461.91

Aruba 1G I-Tmp SFP LC LX 10km SMF XCVR

#JL781A
List Price: ~~$1,269.00~~
Our Price: $917.33

Aruba 10G I-Tmp SFP+ LC SR 300m MMF XCVR

#JL782A
List Price: ~~$1,849.00~~
Our Price: $1,336.59

Aruba 10G I-Tmp SFP+ LC LR 10km SMF XCVR

#JL783A
List Price: ~~$4,619.00~~
Our Price: $3,338.94

Outdoor SFP Weathertight Strain Relief Kit

#Q8N54A
List Price: ~~$167.00~~
Our Price: $120.72

Add Antenna for Radio 0 (5GHz) (AP-584 only)

The AP-584 has dual-band connectors. Use of single-band Omni antennas will band-lock the AP-584 to that frequency. Unused antenna connectors should be terminated with 50 Ohm terminators. For JW026A and JW027A, to fully populate the connectors requires two kits.

ANT-2x2-5005 Pair 5GHz 5dBi Omni N-type Direct Mount Outdoor Antennas

#JW026A
List Price: ~~$364.00~~
Our Price: $263.13

ANT-2x2-5010 Pair 5GHz 10dBi Omni N-Type Direct Mount Outdoor Antennas

#JW027A
List Price: ~~$488.00~~
Our Price: $352.76

ANT-3x3-5712 4.9-5.9GHz 12.0dBi 75x25deg +/- 45deg and V Pol 3 MIMO High Gain Dir Antenna

#JW033A
List Price: ~~$611.00~~
Our Price: $441.68

ANT-4x4-5314 5.15-5.9GHz 14dBi 30x30deg Dual Pol MIMO Hi Gain Dir N-Type Outdoor Antenna

#JX988A
List Price: ~~$857.00~~
Our Price: $619.51

ANT-4x4-D100 Dual Band 90x90deg 5dBi +/- 45 and Vert Pol MIMO N-Type Bracket + Antenna

#Q8N50A
List Price: ~~$555.00~~
Our Price: $401.20

ANT-4x4-D608 Dual Band 60x60deg 8dBi +/- 45 and Vert Pol MIMO N-Type Bracket + Antenna

#Q8N51A
List Price: ~~$555.00~~
Our Price: $401.20

Add Antenna for Radio 1 (2.4GHz) (AP-584 only)

The AP-584 has diplexed (dual-band) connectors. Use of single-band Omni antennas will band-lock the AP-584 to that frequency. Unused antenna connectors should be terminated with 50 Ohm terminators. For JW023A, JW024A, and JW025A, to fully populate the connectors requires two kits.

ANT-2x2-2005 Pair 2.4GHz 5dBi Omni N-type Direct Mount Outdoor Antennas

#JW023A
List Price: ~~$364.00~~
Our Price: $263.13

ANT-2x2-2314 2.4 GHz 14dBi 30x30deg Dual Pol MIMO High Gain Dir N-Type Outdoor Antenna

#JW024A
List Price: ~~$525.00~~
Our Price: $379.51

ANT-2x2-2714 2.4G 14dBi 70deg Sector Dual Pol MIMO N-type Outdoor Antenna

#JW025A
List Price: ~~$488.00~~
Our Price: $352.76

Add RF Cables (AP-584 Only)

AFC7DL03-00 3m Nm to Nm Outdoor Rated RF Cable

#JW064A
List Price: ~~$56.00~~
Our Price: $40.47

AFC7DL04-00 4m Nm to Nm Outdoor Rated RF Cable

#JW065A
List Price: ~~$69.00~~
Our Price: $49.88

ANT-CBL-1 1m Nm to Nm Flexible Outdoor Rated RF Cable

#JW068A
List Price: ~~$48.00~~
Our Price: $34.71

ANT-CBL-2 2m Nm to Nm Flexible Outdoor Rated RF Cable

#JW069A
List Price: ~~$56.00~~
Our Price: $40.47

AP-CBL-1 10ft(3m) Nm to Nf Outdoor Rated RF Cable

#JW070A
List Price: ~~$136.00~~
Our Price: $98.31

Add Lightning Surge Arrestor (AP-584 Only)

Not required unless RF cables are longer than 2m in length

AP-LAR-1 Nm to Nf Outdoor DC to 6 GHz In-line Coaxial Lightning Arrestor

#JW061A
List Price: ~~$185.00~~
Our Price: $133.73

Add Installation Material (Optional AP-584 Only)

Not required unless RF cables are longer than 2m in length

AINS2KKIT-00 2 Elec Tape Rolls Mastic Tape and White Tie Wraps Otdr Install Materials

#JW063A
List Price: ~~$32.00~~
Our Price: $23.14

Spares of Items that are Shipped With The Chassis (Optional)

This kit is a replacement kit for missing or lost gland covers, Ethernet glands, and spare grounding lugs

Outdoor AP Covers and Glands 1-pk M25/5-pk M20 Cover/2-pk M16 Cover/5-pk M20 Gland/2-pk Ground Kit

#Q8N47A
List Price: ~~$93.00~~
Our Price: $67.23

Thread Adapters And Accessories (Optional)

These adapters are for use in mating standard NPT-based conduit or flexcon to the AP‘s M20 Ethernet ports

Outdoor AP Metric to Standard M20 to 1/2 inch NPT 5-pk Thread Adapter

#Q8N48A
List Price: ~~$180.00~~
Our Price: $130.11

Aruba AP-584 Outdoor Access Point Ultimate Wi-Fi 6 performance with high power Bluetooth and Zigbee radios and 5 Gbps Ethernet for the most demanding outdoor locations.