Aruba AP-367 Access Point
Low-cost 802.11ac Wave 2 outdoor access points

Aruba AP-367 Access Point

Aruba Networks Products

Aruba Wireless Access Point

Aruba AP-367 (US) Outdoor AP
*Backorder

#JX974A
Get a Quote!

Click here to jump to more pricing!

Overview:

Multifunctional 360 Series outdoor 802.11ac Wave 2 access points deliver cost-effective wireless connectivity for mobile and IoT devices in educational, enterprise, retail, and industrial settings.

By supporting dual radio operation, the 360 Series APs deliver a maximum data rate of 867 Mbps in the 5-GHz band and 400 Mbps in the 2.4-GHz band, while supporting MU-MIMO operation for simultaneous transmission for up to two 802.11ac Wave 2 devices.

Able to survive in harsh outdoor environments, the 360 Series can withstand exposure to high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection.

The outdoor 360 Series have integrated Aruba ClientMatch™ technology to eliminate sticky clients and enhanced Wave 2 WLAN performance. These outdoor APs continuously gather session performance metrics and utilize the data to steer mobile devices to the best AP and radio on the WLAN, even while users roam. The enhanced ClientMatch technology enables the 360 Series to automatically detect, classify and group 802.11ac Wave 2 capable mobile devices under a single Wave 2 radio, increasing network capacity and efficiency.

Like all Aruba Wave 2 access points, the outdoor 360 Series APs have an integrated Bluetooth Aruba Beacon that simplifies remote management for a network of large-scale battery-powered Aruba Beacons, while also providing advanced location and indoor wayfinding and proximity- based push notification capabilities. This enables businesses to leverage mobility context for developing applications that deliver an enhanced user experience – thus increasing the value of the wireless network for organizations.

CHOOSE YOUR DEPLOYMENT AND OPERATING MODES

The 360 Series APs offer a choice of operating modes to meet your unique management and deployment requirements.

Controller-managed AP or Remote AP (RAP) running ArubaOS™ – When managed by Aruba Mobility Controllers, 360 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
Aruba 360 Series APs running InstantOS™ – In Aruba Instant mode, a single AP automatically distributes the network configuration with other APs in Instant mode in the WLAN.
Air monitor
Hybrid WLAN AP and air monitor
Secure enterprise mesh

For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Aruba APs in Instant mode are factory shipped to any site and configure themselves when powered up

If WLAN and network requirements change, a built-in migration path allows 360 Series APs in Instant mode to become part of a WLAN that is centrally managed by a Mobility Controller.

Benefits:

Delivers 1.27 Gbps aggregate throughput

Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 or 2SS/VHT160 clients) and up to 300 Mbps in the 2.4 GHz band (with 2SS/HT40 clients).

Built-in Bluetooth Low-Energy (BLE) radio

Advanced Cellular Coexistence (ACC)

Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment

Quality of service for unified communication apps

Supports priority handling and policy enforcement forunified communication apps, including cellular Wi-Fi calling and Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing

Best-in-class RF Management

Integrated Adaptive Radio Management™ technology manages the 2.4-GHz and 5-GHz radio bands and ensures that APs stay clear of RF interference

Built-in Bluetooth Low-Energy (BLE) radio

Enables proximity-based push notifications and location- based services for BLE-enabled mobile devices
Enables management for deployment of battery powered Aruba Beacons

Spectrum analysis

Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference

Wireless Mesh

Wireless mesh connections are convenient where Ethernet drops are not available.

Specifications:

AP-365 and AP-367 Specifications
Hardware Variants AP-365 2.4-GHz (400 Mbps max) and 5-GHz (867 Mbps max) radios, each with 2x2 MIMO and integrated omni- directional antennas. AP-367 2.4-GHz (400 Mbps max) and 5-GHz (867 Mbps max) radios, each with 2x2 MIMO and integrated directional antennas. Wi-Fi Radio Specifications AP type: outdoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation 2x2 MIMO with two spatial streams and up to 1,266 Mbps wireless data rate Supported frequency bands (country-specific restrictions apply): 2.400 to 2.4835 GHz 5.150 to 5.250 GHz3 5.250 to 5.350 GHz3 5.470 to 5.725 GHz4 5.725 to 5.875 GHz4 Available channels: Dependent on configured regulatory domain Dynamic Frequency Selection (DFS) compliant to radar coexistence requirements Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of 0.5 dBm Maximum (conducted aggregate) transmit power (limited by local regulatory requirements): 2.4-GHz band: +21 dBm (18 dBm per chain) 5-GHz bands: +25 dBm (22 dBm per chain) Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for improved receiver performance Cyclic delay diversity (CDD) for improved downlink RF performance Short guard interval for 20-MHz, 40-MHz and 80-MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased reliability in signal delivery 802.11ac wave 2 MU-MIMO Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2) 802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support: VHT 20/40/80 802.11n/ac packet aggregation: A-MPDU, A-MSDU Power Maximum power consumption: 12.5 watts Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af-compliant source Antennas Supports 802.11ac TxBF which provides an effectively infinite variety of antenna patterns AP-365: Integrated Omni antennas (H and V polarized) 2.7 dBi @ 2.4 GHz 4.3 dBi @ 5.x GHz AP-367: Integrated Directional antennas (+/-45 polarized) 6.3 dBi @ 2.4 GHz (90° Vertical x 90° Horizontal) 6.5 dBi @ 5.x GHz (90° Vertical x 100° Horizontal) Other Interfaces One 10/100/1000BASE-T Ethernet network interfaces (RJ-45) Auto-sensing link speed and MDI/MDX 802.3az Energy Efficient Ethernet (EEE) PoE-PD: 802.3af PoE Serial console interface (micro USB) Reset button Visual indicator (LED): Power/system status	Mounting Ordered separately Optional mounting kits: AP-270-MNT-V1: Outdoor AP long mount kit for pole/wall mounting. Reduces impact of obstruction by pole or extends away from corner AP-270-MNT-V2: Outdoor AP short mount kit for pole/wall mounting AP-270-MNT-H1: Outdoor AP mount kit for hanging from inclined/horizontal structures AP-270-MNT-H2: Outdoor AP flush mount kit for hanging from inclined/horizontal structures Mechanical Dimensions/weight (unit, excluding mount accessories): 165mm (W) x 165mm (D) x 110mm (H) 6.5” (W) x 6.5” (D) 4.3” (H) 807g/1.78lbs (AP-365) 815g/1.80lbs (AP-367) Dimensions/weight (shipping): 198mm (W) x 200mm (D) x 128mm (H) 7.8” (W) x 7.9” (D) x5.0” (H) 1,115g/2.46lbs (AP-365) 1,123g/2.48lbs (AP-367) Environmental Operating: Temperature: -40° C to +55° C (-40° F to +131°F) ambient in full sun Humidity: 5% to 95% non-condensing Max Elevation 3000m Storage and transportation: Temperature: -40° C to +70° C (-40° F to +158° F) EN 300 019 Storage and Transportation Shock, vibration, and earthquake IEC 60068-2-64/-27/-6 Weather resistance Wind Survivability: Up to 165 mph IP66/67 ASTM B117-07A: Salt spray testing per UL50 NEMA 4x EN 300 019 Environmental testing Non-weather protected locations Full solar exposure Regulatory FCC/Industry of Canada CE Marked RED Directive 2014/53/EU EMC Directive 2014/30/EU Low Voltage Directive 2014/35/EU EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative. Regulatory Model Numbers AP-365: APEX0365 AP-367: APEX0367 Certifications CB Scheme Safety, cTUVus Wi-Fi CERTIFIED™ a,b,g,n Wi-Fi CERTIFIED™ ac (with wave 2 features) Warranty Aruba limited lifetime warranty Minimum Software Versions Unified ArubaOS and InstantOS 6.5.2.0 and 8.2.0

AP-365 and AP-367 Specifications

Hardware Variants

AP-365
- 2.4-GHz (400 Mbps max) and 5-GHz (867 Mbps max) radios, each with 2x2 MIMO and integrated omni- directional antennas.
AP-367
- 2.4-GHz (400 Mbps max) and 5-GHz (867 Mbps max) radios, each with 2x2 MIMO and integrated directional antennas.

Wi-Fi Radio Specifications

AP type: outdoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n
- In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation
2x2 MIMO with two spatial streams and up to 1,266 Mbps wireless data rate
Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz3
- 5.250 to 5.350 GHz3
- 5.470 to 5.725 GHz4
- 5.725 to 5.875 GHz4
Available channels: Dependent on configured regulatory domain
Dynamic Frequency Selection (DFS) compliant to radar coexistence requirements
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit power: Configurable in increments of 0.5 dBm
Maximum (conducted aggregate) transmit power (limited by local regulatory requirements):
- 2.4-GHz band: +21 dBm (18 dBm per chain)
- 5-GHz bands: +25 dBm (22 dBm per chain)
Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay diversity (CDD) for improved downlink RF performance
Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beam-forming (TxBF) for increased reliability in signal delivery
802.11ac wave 2 MU-MIMO
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)
802.11n high-throughput (HT) support: HT 20/40
802.11ac very high throughput (VHT) support: VHT 20/40/80
802.11n/ac packet aggregation: A-MPDU, A-MSDU Power
Maximum power consumption: 12.5 watts
Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af-compliant source

Antennas

Supports 802.11ac TxBF which provides an effectively infinite variety of antenna patterns
- AP-365: Integrated Omni antennas (H and V polarized)
  - 2.7 dBi @ 2.4 GHz
  - 4.3 dBi @ 5.x GHz
- AP-367: Integrated Directional antennas (+/-45 polarized)
  - 6.3 dBi @ 2.4 GHz (90° Vertical x 90° Horizontal)
  - 6.5 dBi @ 5.x GHz (90° Vertical x 100° Horizontal)

Other Interfaces

One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- PoE-PD: 802.3af PoE
Serial console interface (micro USB)
Reset button
Visual indicator (LED):
- Power/system status

Mounting

Ordered separately
Optional mounting kits:
- AP-270-MNT-V1: Outdoor AP long mount kit for pole/wall mounting. Reduces impact of obstruction by pole or extends away from corner
- AP-270-MNT-V2: Outdoor AP short mount kit for pole/wall mounting
- AP-270-MNT-H1: Outdoor AP mount kit for hanging from inclined/horizontal structures
- AP-270-MNT-H2: Outdoor AP flush mount kit for hanging from inclined/horizontal structures

Mechanical

Dimensions/weight (unit, excluding mount accessories):
- 165mm (W) x 165mm (D) x 110mm (H)
- 807g/1.78lbs (AP-365)
- 815g/1.80lbs (AP-367)
Dimensions/weight (shipping):
- 198mm (W) x 200mm (D) x 128mm (H)
- 1,115g/2.46lbs (AP-365)
- 1,123g/2.48lbs (AP-367)

Environmental

Operating:
- Temperature: -40° C to +55° C (-40° F to +131°F) ambient in full sun
- Humidity: 5% to 95% non-condensing
Max Elevation 3000m
Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)
- EN 300 019 Storage and Transportation
Shock, vibration, and earthquake
- IEC 60068-2-64/-27/-6
Weather resistance
- Wind Survivability: Up to 165 mph
- IP66/67
- ASTM B117-07A: Salt spray testing per UL50 NEMA 4x
- EN 300 019 Environmental testing
  - Non-weather protected locations
  - Full solar exposure

Regulatory

FCC/Industry of Canada
CE Marked
RED Directive 2014/53/EU
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
EN 300 328
EN 301 489
EN 301 893
UL/IEC/EN 60950
EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.

Regulatory Model Numbers

AP-365: APEX0365
AP-367: APEX0367

Certifications

CB Scheme Safety, cTUVus
Wi-Fi CERTIFIED™ a,b,g,n
Wi-Fi CERTIFIED™ ac (with wave 2 features)

Warranty

Aruba limited lifetime warranty

Minimum Software Versions

Unified ArubaOS and InstantOS 6.5.2.0 and 8.2.0

Wireless Radio Specifications:

RF Performance Table
	Maximum transmit power (dBm) per transmit chain	Receiver sensitivity (dBm) per receive chain
802.11b 2.4 GHz
1 Mbps	18.0	-91.0
11 Mbps	18.0	-88.0
802.11g 2.4 GHz
6 Mbps	18.0	-91.0
54 Mbps	18.0	-73.0
802.11n HT20 2.4 GHz
MCS0/8	18.0	-91.0
MCS7/15	18.0	-72.0
802.11n HT40 2.4 GHz
MCS0/8	18.0	-88.0
MCS7/15	18.0	-69.0
802.11ac VHT20 2.4 GHz
MCS0 Nss1&Nss2	18.0	-91.0
MCS8 Nss1&Nss2	18.0	-67.0
802.11ac VHT40 2.4 GHz
MCS0 Nss1&Nss2	18.0	-88.0
MCS9 Nss1&Nss2	17.0	-63.0
802.11a VHT80 5 GHz
6 Mbps	22.0	-91.0
54 Mbps	20.0	-74.0
802.11n HT20 5 GHz
MCS0/8	22.0	-91.0
MCS7/15	20.0	-72.0
802.11n HT40 5 GHz
MCS0/8	22.0	-88.0
MCS7/15	20.0	-69.0
802.11ac VHT20 5 GHz (SU-MIMO)
MCS0 Nss1&Nss2	22.0	-91.0
MCS8 Nss1&Nss2	19.0	-68.0
802.11ac VHT40 2.4 GHz
MCS0 Nss1&Nss2	22.0	-87.0
MCS9 Nss1&Nss2	19.0	-63.0
802.11ac VHT40 2.4 GHz
MCS0 Nss1&Nss2	22.0	-85.0
MCS9 Nss1&Nss2	19.0	-59.0

Note: please check with your country manager for regional product schedules.

Documentation:

Aruba AP-360 Series Access Points Datasheet (.PDF)

Pricing Notes:

Pricing and product availability subject to change without notice.

Aruba Networks Products

Aruba Wireless Access Point

Aruba AP-367 (US) Outdoor AP
*Backorder

#JX974A
Get a Quote!

2. ADD POWERING ACCESSORIES (OPTIONAL)

PD-9001GO-DC 30W 802.3at PoE+ 10/100/1000 12-24V DC in Outdoor Surge Prot Midspan Injector
*Backorder

#JW630A
Get a Quote!

PD-9001GO-NA 30W 802.3at PoE+ 10/100/1000 Otdr Surge Prot NA Power Cord Mdspan Injector
*Backorder

#JW700A
Get a Quote!

PD-9001GO-INTL 30W 802.3at PoE+ 10/100/1000 Outdoor Surge Prot Intl Power Cord Injector
*Backorder

#JW701A
Get a Quote!

3. ADD MOUNT ACCESSORIES (OPTIONAL)

AP-270-MNT-V1 270 Series Outdoor Pole/Wall Long Mount Kit

#JW052A
List Price: ~~$168.00~~
Our Price: $122.08

AP-270-MNT-V2 270 Series Outdoor Pole/Wall Short Mount Kit

#JW053A
List Price: ~~$140.00~~
Our Price: $101.73

AP-270-MNT-H1 AP-270 Series Outdoor AP Hanging or Tilt Install Mount Kit

#JW054A
List Price: ~~$140.00~~
Our Price: $101.73

AP-270-MNT-H2 AP-270 Series Access Flush Wall or Ceiling Mount

#JW055A
List Price: ~~$73.00~~
Our Price: $53.05

HPE Aruba Foundation Care Next business day Exchange

Aruba 1 Year Foundation Care Next business day Exchange AP-365

#H4XN9E
List Price: ~~$69.00~~
Our Price: $65.15

Aruba 3 Year Foundation Care Next business day Exchange AP-365
*Backorder

#H4XP4E
Get a Quote!

Aruba 4 Year Foundation Care Next business day Exchange AP-365
*Backorder

#H4XR5E
Get a Quote!

Aruba 5 Year Foundation Care Next business day Exchange AP-365
*Backorder

#H4XT6E
Get a Quote!

HPE Aruba Foundation Care 4-Hour Exchange

Aruba 1 Year Foundation Care 4-Hour Exchange AP-365
*Backorder

#H4XP0E
Get a Quote!

Aruba 3 Year Foundation Care 4-Hour Exchange AP-365

#H4XP5E
List Price: ~~$278.00~~
Our Price: $267.71

Aruba 4 Year Foundation Care 4-Hour Exchange AP-365

#H4XR6E
Our Price: $361.00

Aruba 5 Year Foundation Care 4-Hour Exchange AP-365

#H4XT7E
List Price: ~~$437.00~~
Our Price: $418.73

HPE Aruba Services Renewal

Aruba 1 Year Renewal Foundation Care Next business day Exchange AP-365
*Backorder

#H4XV7PE
Get a Quote!

Aruba 1 Year Renewal Foundation Care 4-Hour Exchange AP-365
*Backorder

#H4XV9PE
Get a Quote!

Aruba AP-367 Access Point Low-cost 802.11ac Wave 2 outdoor access points

Overview:

Benefits:

Delivers 1.27 Gbps aggregate throughput

Built-in Bluetooth Low-Energy (BLE) radio

Advanced Cellular Coexistence (ACC)

Quality of service for unified communication apps

Best-in-class RF Management

Built-in Bluetooth Low-Energy (BLE) radio

Spectrum analysis

Wireless Mesh

Specifications:

Wireless Radio Specifications:

Documentation:

Aruba AP-367 Access Point
Low-cost 802.11ac Wave 2 outdoor access points